Posts

Showing posts from April, 2025

Vehicle and Props Design GCD61804/Final project

Image
Vehicle and Props Design GCD61804/Final project LIU CHENG RUI  (0370930) GCD61804/Vehicle and Props Design / Bachelor of Design (Hons) in Creative Media / Taylor's University     INSTRUCTION FINAL PROJECT : POST PRODUCTION & PROFILING Week13:  Progression on 3D Building First of all, I created the general shape and structure of the vehicle, and then delved deeper and made further improvements on this basis. Fig13.1 A general model of the vehicle After that, I discovered some structural issues, such as the cab being too flat and the position of the angular protrusions at the front end being incorrect. I began to make initial revisions. Fig13.2  Model refine After that, I continued to delve into the shape and details of my vehicle. I adjusted the size of the rear wheels because the original ones might not ...

Vehicle and Props Design GCD61804/Project2

Image
Vehicle and Props Design GCD61804/Project2 LIU CHENG RUI  (0370930) GCD61804/Vehicle and Props Design / Bachelor of Design (Hons) in Creative Media / Taylor's University     INSTRUCTION PROJECT 2 : PRODUCTION Week 9 - Props Design For the prop design, I want to create a small detection robot placed in the vehicle. It is more sensitive and its compact size can pass through certain special terrains more easily and is less likely to be detected. Fig9.1 Detector mood board For my small detector, I made three different sketches respectively based on insects and tires as references. Fig9.2 Sketch of the spider-shaped detector Fig9.3 Sketch of gear-type detector ...

Vehicle and Props Design GCD61804/Project1

Image
Vehicle and Props Design GCD61804/Project1 LIU CHENG RUI  (0370930) GCD61804/Vehicle and Props Design / Bachelor of Design (Hons) in Creative Media / Taylor's University    INSTRUCTION PROJECT 1 : PRE-PRODUCTION week2 Mood Board and Sketches In the second week, we were informed that we needed to start project1, and the first one was Mood Board and Sketches. We need to choose at least one of land, water and sky for the design. I first choose land. For the design of land vehicles, I prefer to combine insects with vehicles, such as scorpions, spiders, ants and other insects. Fig 2.1 Mood Board (Land) Simple explanations of some functions and forms: 1.Spider-shaped vehicles have stronger climbing power, can perform high-altitude operations, and are faster. 2.Scorpion-shaped vehicles are divided into two types. One is the attack type vehicle, where the double pincers ar...